Our K 1200 LT #2 with wings is designed with a subtle reverse curve that pushes the ram air higher than the stock shield. The bike pictured is a twenty four inch shield with a standard crown. The wings are built into the shield and as the shield rises the wings become a natural extension of the BMW wings. The wings provide extra protection for the hands, forearms and shoulders for the ultimate in protection. This shield is also an ideal choice for cold climate riding conditions. The result is a nice quiet pocket of air that greatly reduces or eliminates the turbulent buffeting effects. This shield is designed to be looked over and provides unequaled performance.
This shields reverse contour makes it stand taller because it actually goes away from rider. This shield will stand about two inches taller than the OEM of equal length. Our minus two or a twenty two inch shield will actually stand just as tall as the stock twenty four inch shield once installed. Height is determined by measuring from bottom center to top center, please measure prior to ordering. Two different crowns designs to choose from, the standard which is very similar to the OEM or our Euro crown with a slightly lower center cut for better vision and upper body wind protection
Manufactured from .250 aircraft grade acrylic and available in clear, green, light & dark gray tints.
Our Standard Windshield is 24" tall and you must use this as a reference to determine the correct height
Available in Euro too, see the un-mounted shield below

|
Euro Cut |
Mounted shields shown below are the Standard Cut
Standard Cut Below
|
|
Back Angle View |
Back View |
 |