The new Ulysses touring shield is perfect for long distance touring and colder climate riding, where you need more protection from the elements. This windshield mounts on the front fairing support, and uses the original six bolts that will secure the new windshield to the fairing/bike.

Included for use are (6) rubber washers to isolate vibration between the shield and the bike, and another (6) stainless/rubber washers to dampen vibration and spread the bearing load between the shield and bolt head. There will be more vibration evident at idle, but the vibration in the shield will smooth out as RPM’s are increased.  The shield has a pronounced forward rake, which lifts the impact air over the head of the rider.

Height measurements on our shield are taken from the top, center height of the original fairing deflector (behind the windshield), and measured upwards. Width on all shields is approximately 18” (which is about 4” wider than the stock shield) and is made of .187 aircraft grade acrylic. Three height sizes are available.