This design significantly reduces the distance between the shields trailing edge and helmet area. It reduces or eliminates the turbulence/buffeting where others did not meet expectations. They measure about three inches lower than an original design of equal length once installed. The highest point of the shield should be level with or just below the riders mouth.
First determine which standard/original height works best for you and make a note of it. Height is measured from the center screw to the top of the shield and may vary fractionally. Once an original design height has been determined just add three inches for the SSC. For example, if you're best suited for a nine inch original design then you would need to order a twelve for the SSC. That should put the highest point of the shield level with or just below the riders mouth for optimum performance.
Please be advised that SSC is designed to be looked over and not looked through. All shields come pre-formed, featuring polished edges & are 20% thicker than the originals.
Most bar mounted GPS units will not interfere with this shield.
Windshield Bags & dash mounted GPS units will interfere
& are not recommended.
Got bags? We have the finest bag liners available with quality that is second to none. Plus all of our Harley products are proudly made right here in the USA! Order below with your shield and get your bags at 10% off!
Manufactured from .150 aircraft grade acrylic and available in clear, light & dark gray tints.
Click Here To View the Color Gallery