Replacement shield only (brackets not included) must use existing hardware. Fits 39 MM fork tubes & will not fit models with auxiliary lighting or old style detachable hardware.
Finally a replacement shield with the colors and sizes that suits your riding needs. There are a few minor trade offs but it's been reported to be insignificant. These shields are 20% thicker than the originals which results in less vibration at idle and better stability at highway speeds. Our shields feature polished edges for a glass like appearance with quality that's second to none.
How to determine your size
Please be advised that a measurement is required and a tape measure will be needed. This is a three hole per side vertically mounted shield, from either side measure from the bottom hole to the center hole. The shield does not need to be removed and you are measuring the screw heads on center. Two different hole spreads to choose from and it will be either five or six inches (measurement may vary up to 1/8 of an inch).
Trade offs are as follows:
- • Slightly higher or lower head light cut outs
- • Slightly wider or narrower widths
- • Shield designs will be different when compared to original designs
- • Different head light cut outs, cut out is as pictured
Features & Benefits:
- • A more classic look
- • Increased lower & upper width for better air protection
- • Substantial cost savings
- • Replaces HD part # 59802-05, 57199-05, 58360-09 & 58376-09
Manufactured from .187 aircraft grade acrylic and available in clear, opaque black, light green, and light/dark gray tints.
Click Here To View the Color Gallery
|
