|
|
 |
|
|
| BMW 1100/1150 RT Reverse Contour Windshield Design #2 and Euro Cut |
| Specifications: |
Standard OEM 14.5" height
Standard OEM 23" width |
Our #2 Reverse Contour windshield offers a quiet zone around the head and shoulder area. The shield has a "flip" design on the top area to deflect the air over the rider. The shield comes standard at 2" wider than stock and heights starting at 2.5" over stock up to 7.5" over stock. This windshield is a full 1/4" thick like the OEM and made from the same aircraft quality acrylic that we use for our aircraft windshields. For 2003, we have two trim/cut designs, Standard Cut and Euro Cut. The Standard is flat across the top, like a stock shield. Our new Euro Cut features a lower center for better vision. The Euro is trimmed with the outer frontal area 1/2" higher on the edges than the center, so if you order a +3.5", it will be 3.5" above stock in the center and +4 on the edges.
The #2 shield; the widest point is measured approx. 2" above the top hole(s)
The #2 is our best selling RT windshield.
Available in Clear and 4 colors. Dark Gray and Bronze not recommended for night riding. |
|
| Standard Cut Samples |
|
|
|
| Euro Cut Samples |
|
*All orders are custom built, Please allow 9 - 14 working days for delivery*
|
Description |
Thickness |
Item |
Clear/Tint |
|
1100
RT
or
1150 RT |
1/4" |
Windshield
Design #2 |
|
| How to choose your height/width ? |
NOTE: No Refunds or Exchanges on All Opaque Black, Ice Blue, Light Green, Dark Gray & Bronze Tinted Windshields |
|
| |
|
|
|
